Recent content by C_Breeze

Looking for replacement cabin lighting on my '73 32'. 12 volt need a square under cabinet light and a bigger one over the sette. Any suggestions on used/affordable? 50 bucks doesn't seem logical on the standard search?

Well now that I've seen the pictures of Dave's rig I think I'm going that route. I will have to raise the boom a little to provide space though. A little smaller mainsail never hurt anything am I right?

What year is your 32? I just picked up a '73 32 and am having trouble designing my future Bimini as well. I'm thinking about raising the boom height while I'm at it, because a new mainsail has to happen soon.

Carburetor advice Just took the carburetor off of my early model Atomic 4. My rebuild kit is on the way and should be here Saturday. I want to get a head start on the cleaning but am a little hesitant. Anyone have any advice on where to start? It is a zenith model. As always, Thanks...

Just took the carburetor off of my early model Atomic 4. My rebuild kit is on the way and should be here Saturday. I want to get a head start on the cleaning but am a little hesitant. Anyone have any advice on where to start?

I have a shut off valve at the exhaust port on the hull in the back, so Ill close that when Im not under power and I will be fine. Side note, was just looking at the picture I posted of the top of the motor and I realized that my spark plug wiring appears to be all wrong... (facepalm) That...

Update- after working this weekend After troubleshooting my cooling system issues I have narrowed the problem to the source. Muffler. Tracked water flow through the engine all the way to the back end of the manifold and all was good, save for no water out my exhaust. followed red hose out of...

Last night's mission 10-22-14 10:30pm - close up the shop pack the truck 11pm - Drive 2 hours to Sneads Ferry, NC where the boat sits waiting to be brought home. 1am - begin wrestling with the water pump hoses. (located aft of the motor) 2am - Hanging upside down out of the lazarette...

Thanks to Bill and Mac for clearing some stuff me. Making the two hour drive to the boat again tonight to try and re route my raw water and clamp that bypass hose. I've got untill the 4 th of November to get her 120 miles back to my home port in Washington, NC so I don't have to pay two slip...

http://www.moyermarine.com/forums/attachment.php?attachmentid=2540&stc=1&d=1278859310 Just found this diagram. If I'm going to bypass the original water pump with my working impeller, should I connect it to that t fitting on the side of the block, or could I go straight to the thermostat...

Dean, Yours and my setup looks identical from the outside, yes that is the thermostat housing. When following the hose from the wp to the thermostat housing, is that just a bracket to keep the hose in place?

The attachment 15084 is my working impeller and what I think was added for the fwc system. The attachment 15085 which you have to click on for some reason, is the original water pump I think. I know for a fact the the first impeller works, I took a video of it spinning, so do you think I...